3 Auto Body Restoration Tips To Make Your Classic Car Perfect

16 October 2017
 Categories: , Blog

If you are restoring a classic car, you are going to have some work to do to the body and paint. When you do your restorations, you want them to be as perfect as possible. Tricks, like priming unpainted surfaces and polishing original paint, will help you accomplish this. Here are some great tips and tricks for auto body restorations to make sure your classic car is perfect when you finish your project:

1. Treating and Coating Unpainted Surfaces to Prevent Rust Problems

There may be some parts of your car that have unpainted surfaces or areas where paint wears to the bare metal. These are usually areas of the body where rust and corrosion cause the most damage. When you are doing restorations, you will want to prime these surfaces with a rust-inhibitor before giving it the final coat. If your restoration is not all original or something like an RV, SUV or off-road vehicle, consider coating the surfaces underneath with a protective coating like spray-on bed liners.

2. Dealing with Light Body Damage with Paintless Dent Repair Techniques

When you are doing repairs to your car, there may be light body damage that you must deal with. A lot of times, when these repairs are done, it means using filler and drilling holes, which then need to be repainted. If you have a car with original paint, you may not want to mess the paint job up. There are several paintless dent repair methods that can be used to repair dents without damaging the original paint. If the dent is too bad and paintless methods cannot be used, an auto repair shop can help with blending the old paint in with the repaired areas.

3. Body Repairs and Replacement Parts Where Restoration Is Difficult

Sometimes, when you are doing an auto restoration, there are going to be body parts that are too far gone for repairs. There are a few options for repairs, such as using salvaged parts for the repairs. There may also be parts that are difficult to find, which will require aftermarket parts. When replacing parts, consider lightweight options like fiberglass and carbon fiber, which will help improve the overall performance of your car.

These are some tips that will help you with your classic car restorations and the bodywork that needs to be done. If you need help with repairs and painting, contact an auto repair service to help with some of the work that needs to be done. Contact a company like Oakley's Garage & Towing for more information and assistance.